Angular Check Valve – 50MM & 40MM
Angular Check Valve Details
- • Our Angular Check Valve 40MM/50MM APPROVED BY ALL OIL COMPANIES IN INDIA
- • Angular Check Valve 40MM/50MM USED FOR LIQUID SPECIALLY PETROLEUM PRODUCTS LIKE LDO, HSD, KEROSENE, FURNACE OIL, BIO DIESEL ETC. FUNCTIONS EQUALLY REQUIRED IN SUCTION PUMPS
- • We are instrumental in manufacturing, supplying and exporting premium quality Angular Check Valve 40MM/50MM. The offered unit is manufactured under the supervision of our skilled professionals using the finest quality raw material and cutting edge technology in sync with set industry standards. Apart from this, provided unit is sternly tested by our quality controllers on variegated parameters so as to ensure its high performance.
- • Angular Check valve – A uniquely designed valve with rubber poppet used in the suction line of dispensing pump and installed on the top of underground tank
- • Gun metal valve seat will not be damaged due to contact with softer rubber poppet resulting in longer valve life.
- • Rubber poppet, being lighter than metal poppet, will reduce resistance in the suction line and hence will help in smooth suction.
- • All the friction and contact point are either cast iron with brass or gun metal and mild steel with neoprene rubber and thus prevent spark
- • Easy in maintenance
- • It can function effectively in a wide temperature range of -25 Degree Celsius & +100 Degree Celsius
- • It can withstand a pressure load upto 60lbs
- • Most of the service stations and commercial fueling facilities rely on a suction pumping system. In such systems, various types of “check” valves such as angular check valves, vertical check valves and foot valves are used to hold product in the piping when the pumps are turned off.
- • Our angular check valve is usually located at the top of the tank. Product enters the valve through the bottom and makes a 90-degree turn before it exits, thus the term “angular check valve.”
- • Our Angular check valve commonly installed in applications that backflow would cause an issue.
Our Angular Check Valve 40MM/50MM APPROVED BY ALL OIL COMPANIES
Angular Check Valve Features
- NAME OF THE PRODUCT : ANGULAR CHECK VALVE
- AVAILABLE MODELS : 2 INCH (50 mm) & 1.5 INCH (40 mm)
- MODEL NO: N/A
- APPROVAL MARK: N/A
- THREAD : BSP
- WEIGHT : 1.15 KG APPROX
- BODY MATERIAL : CAST IRON
- POPPET ARMS MATERIAL : NEOPRENE, BRASS
- SEAT MATERIAL : GUN METAL
- CAP MATERIAL : BRASS
- TESTED PRESSURE : 10 PSI TO 60 PSI
- OPERATING TEMPERATURE : -5⁰C to 55⁰C
UNIQUE FEATURES :
- IT HAS A CONTINUOUS DUTY CYCLE
- Pressure: It can withstand a pressure load upto 60lbs
- Maintenance : No special tools are required to carry out periodic maintenance. Periodically i.e at least once in a Six months should be cleaned for smooth functioning of the valve
- PROMPT AFTER SALE BACK UP SERVICE
- Our Angular Check Valve 40MM/50MM APPROVED BY ALL OIL COMPANY